4. Select Internet Protocol (TCP/IP) and then
click Properties.
Figure 5 Local Area Connection
Properties
8. Remove any previously installed gateways in the IP Settings tab and click OK to go back to the
Internet Protocol TCP/IP Properties screen.
1
See the appendices for information on configuring DNS server addresses.
ZyAIR G-3000 Quick Start Guide
5. Select Use the following IP Address and fill
in an IP address (between 192.168.1.3 and
192.168.1.254).
6. Type 255.255.255.0 as the Subnet mask.
7. Click Advanced.
Figure 6 Internet Protocol Properties
9
1