ZyXEL Communications ZyXEL ZyAIR G-3000 Quick Start Manual page 15

WEP (Wired Equivalent Privacy) encrypts data frames before transmitting over the wireless network. Select either 64-
bit or 128-bit from the WEP Encryption drop-down list box to activate WEP encryption. Select Disable to turn off
WEP data encryption.
Select ASCII or HEX WEP key input method and then follow the on-screen instructions to set up the WEP keys.
Click Next to continue.
The wireless stations and ZyAIR must use the same Name (SSID), channel
ID and WEP encryption key (if WEP is enabled) for wireless
3. Fill in the fields in the last wizard configuration screen.
If you change the ZyAIR's IP address, you must use the new IP address
if you want to access the web configurator again.
Change the wireless parameter settings in the wireless stations to match those of the ZyAIR. Refer to the
User's Guide for your wireless adapter.
ZyAIR G-3000 Quick Start Guide
communication.
15
Select Get automatically from
DHCP to have the ZyAIR obtain
an IP address from a DHCP
server.
You must know the IP address
assigned to the ZyAIR (by the
DHCP server) to access the
ZyAIR again.
Select Use fixed IP address to
give the ZyAIR a fixed, unique IP
address. Enter a subnet mask
appropriate to your network and
the gateway IP address if
applicable.
Click Finish.