Troubleshooting - ZyXEL Communications ZyXEL ZyAIR G-200 Quick Installation Manual

PROBLEM
Windows does not
auto-detect the
ZyAIR.

Troubleshooting

Make sure the ZyAIR is connected to the computer USB port
properly and then restart your computer. Check the LEDs on
the ZyAIR.
Perform a hardware scan by clicking Start, Settings, Control
Panel and double-clicking Add/Remove Hardware. (Steps
may vary depending on the version of Windows).
Follow the on-screen instructions to search for the ZyAIR and
install the driver.
Check for possible hardware conflicts. In Windows, click Start,
Settings, Control Panel, System, Hardware and then click
Device Manager. Verify the status of the ZyAIR under Network
Adapter. (Steps may vary depending on the version of
Windows).
Reinstall the driver/utility.
Install the ZyAIR in another computer. If the error persists, you
may have a hardware problem. In this case, you should contact
your local vendor.
CORRECTIVE ACTION
5