Troubleshooting - ZyXEL Communications ZyAir G-220F Quick Installation Manual

PROBLEM
Windows does not
auto-detect the
ZyAIR G-220F.

Troubleshooting

Make sure the ZyAIR G-220F USB connecter is inserted into
the computer USB port properly and then restart your
computer. Check the LED on the ZyAIR G-220F.
Perform a hardware scan by clicking Start, Settings, Control
Panel and double-clicking Add/Remove Hardware. (Steps
may vary depending on the version of Windows).
Follow the on-screen instructions to search for the ZyAIR G-
220F and install the driver.
Use the Device Manager window to check for possible
hardware conflicts.
Click Start, Settings, Control Panel, System, Hardware and
then click Device Manager. Verify the status of the ZyAIR G-
220F under Network Adapter. (Steps may vary depending on
the version of Windows).
Install the ZyAIR G-220F in another computer.
If the error persists, you may have a hardware problem. In this
case, you should contact your local vendor.
CORRECTIVE ACTION
7