Front Panel Led; Troubleshooting - ZyXEL Communications ZyAIR B-220 Quick Installation Manual

The following table describes the LED on the front panel of the USB Stick.
COLOR STATUS
Blue On
Blink (fast)
Blink (slow)
PROBLEM
Windows does not
auto-detect the
USB Stick.

Front Panel LED

The USB Stick has a successful connection to an access
point.
The USB Stick is sending or receiving data.
The USB Stick is ready but not connected to an access
point.

Troubleshooting

Make sure the USB connecter is inserted into the computer
USB port properly and then restart your computer. Check the
LED on the USB Stick.
Perform a hardware scan by clicking Start, Settings, Control
Panel and double-clicking Add/Remove Hardware. (Steps
may vary depending on the version of Windows).
Follow the on-screen instructions to search for the USB Stick
and install the driver (locate the driver file in the support CD).
DESCRIPTION
CORRECTIVE ACTION
9