Advertisement
Item Description
Components and waste containing asbestos
Components, parts and materials containing
refractory ceramic fibers
Components, parts and materials containing
radioactive substances
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where
components and materials requiring selective treatment can be removed.
Tool Description
Torque Driver (Standard)
Torque Bit
Torque Bit
Torque Bit
Cutter
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective
treatment:
1. Remove PULL OUT
2. Unscrew and remove - SCREW-MACHINE ASSEMBLY M5 X 0.8 10M ROHS
3. Unscrew and remove - SCREW-THD-RLG M3 X 0.5 5MM-LG ROHS at 14 Locations and CHASSIS COVER
4. Remove INSULATOR, PSU TOP nPoE FXD from CHASSIS COVER
5. Cut and remove – CABLE TIE at 1 location
6. Unplug - AC connector from POWER SUPPLY
7. Unplug – Cable connect between POWER SUPPLY and ASSY, 48NP FIXED PCA + MECH
8. Unplug – FAN connector from ASSY, 24NPoE FIXED PCA + MECH
9. Unplug – 0.5mm CENTRE FFC CABLE 24 CKTS from PCA, USABILITY LED BOARD
10. Remove – FAN CABLE from COVER, COMMON DIVERTER NP
11. Unscrew and remove - SCREW-TAPPING M3 X 0.5 8MM-LG ROHS at 4 locations and POWER SUPPLY
12. Unscrew and remove - SCREW-TAPPING M3 X 0.5 8MM-LG ROHS at 2 Locations and SHIELD PSU CABLE
13. Unplug – 0.5mm CENTRE FFC CABLE 24 CKTS from ASSY, 24NPoE FIXED PCA + MECH
14. Unscrew and remove - SCREW T10 M3X6 at 2 locations
15. Remove - PCA, USABILITY LED BOARD
16. Remove - PUSHBUTTON, SMT, MODE SWITCH
17. Unscrew and remove -
18. Unscrew and remove -
19. Unplug and remove - AC socket from CHASSIS
20. Unscrew and remove - SCREW-TAPPING M3 X 0.5 8MM-LG ROHS at 11 Locations and ASSY, 24NPoE FIXED
PCA + MECH
21. Remove - INSULATOR, PSU BOTTOM nPoE FXD from CHASSIS
22. Remove - INSULATOR, PULL TAB GUIDE from CHASSIS
23. Remove – COVER, COMMON DIVERTER NP from CHASSIS
MF877-00
Template Revision B, 18-Nov-2016
SCREW-MACHINE M4X0.7 6MM LG
SCREW-TAPPING PL FH M4X1.75 8MM LG at 6 Locations and FAN
HPE instructions for this template are available at
Notes
Tool Size (if
applicable)
T10 & T25
T10-70 mm
T25-89mm
M4 Philip Head
MF877-01
Quantity
of items
included
in
product
Page 2
Advertisement
