Bridge Mode - ZyXEL Communications ZyWALL 70 Quick Start Manual

6 Check the Network
Status table. If the
WAN 1 status is not
Down and there is an
IP address, go to
Section 5.
If the WAN 1 status is
Down (or there is not
an IP address), click
Internet Access and
use Section 4 to
configure WAN 1.
Use the NETWORK
WAN screens if you
need to configure
WAN 2. You can also
configure load
balancing between the
WAN ports.

3 Bridge Mode

When you set the ZyWALL to bridge mode, it functions as a transparent firewall. Do the following to set the
ZyWALL to bridge mode.
ENGLISH
4