D) Operation; E) Battery And Charger; Get Started; Operating Elements - TOOLCRAFT HSG-100 Operating Instructions Manual

d) Operation

• Do not use when damaged.
• Wear a suitable mask (respirator) that covers the nose and mouth to protect against breathing in any
small particles that pass through the exit.
• Before suction, pointed, sharp-edged or very large parts should be removed in order to avoid damage
to the appliance.
• If the suction tube is blocked, remove the objects before using the appliance again.

e) Battery and charger

• Refer to the battery and battery charger operating instructions for further information.

7. Get started

1. Familiarize yourself with the operating elements.
Refer to section 8. Operating elements for details.
2. Get the vacuum cleaner ready for operation.
Check the filter for damage, install attachments and the battery.
Refer to section 9. Prior to operation for details.
3. Operate the vacuum cleaner.
Refer to section 10. Operation for details.

8. Operating elements

A C
1 Release button for dust container
2 On/Off switch
3 Handle
4 Battery pack
5 Ventilation slots
6 Dust container
7 Extension tube
8 Crevice nozzle
9 Brushnozzle
10 Floor brush
21