Removing Weighed Item; Setting The Timer - Silvercrest 285527 Operation And Safety Notes

Place the next item to be weighed in the bowl / container.
The weight of the newly added item is shown in the
LC display
Note: You can repeat this process many times. Never
place more than 5 kg onto the product.
Remove the bowl / container and the weighed item from the
weighing surface
Again, the a weight of "0" is shown in the LC display

Removing weighed item

Press the ▲ ZERO / TARE button
appears in the LC display
shown in the LC display
Remove the desired amount of the weighed item.
The weight of the item is shown with the minus sign in the
LC display
Note: You can repeat this process many times.
Remove the bowl / container and the weighed product from
the weighing surface
. Again, a weight of "0" is shown in the LC display
7

Setting the timer

The timer can be used in the clock and weighing modes. It
enables you to set the timer for a defined time period. The
defined time runs as a countdown and a signal sounds at the
end of the period.
Press the T-SET button
twice in the weighing mode. A bell-symbol appears in the
LC display
Note: You can set the time period precisely to the second.
Press and hold the ▲ ZERO / TARE button
.
5
. Press the ▲ ZERO / TARE button
2
5
as a negative value.
5
. Press the ▲ ZERO / TARE button
2
4
and the time interval to be defined blinks.
5
. The message "TARE"
7
. Again, a weight of "0" is
5
.
once in the clock mode or
.
7
5
5
or ▼ UNIT
7
GB/IE 33
.
.