Operation - Amcor SF12000E-V2 User Manual

OPERATION

POWER
Press "POWER" to switch the unit On or Off.
After the machine is turned on, it will automatically enter cooling mode with a desired temperature of
22℃ and low fan speed.
COOL MODE
Cold air is expelled from the front of the unit, and hot air is expelled through the exhaust hose.
Press "MODE" to select cooling mode, the cooling mode indicator will be lit.
Press the "UP" and "DOWN" buttons to adjust the desired temperature (between 16℃ and 31℃). Press
"SPEED" to select the fan speed (high, medium and low).
DRY MODE
The unit should be set up without a vent hose, moisture is extracted from the air that passes through
the unit. Continuous drainage should be set up for the moisture collected.
Press "MODE" to select dry mode, the dry mode indicator will be lit.
When using dry mode the sleep function cannot be used and the fan speed is low.
FAN MODE
Press "MODE" to select fan mode, the fan mode indicator will be lit.
Press "FAN" to select fan speed (high and low).
Desired temperature and sleep function cannot be used.
TIMER BUTTON: Timer functions cannot be combined or repeated.
POWER ON TIMER:
With the appliance turned off, press the "TIMER" button to setup the power-on time. Press the
UP and DOWN buttons to adjust the duration of the timer (from 1 to 24 hours). Timer indicator
turns on. The unit will start after selected number of hours.
POWER OFF TIMER:
With the appliance running with the desired settings, press the "TIMER" button to setup the
power-off timer. Press the UP and DOWN buttons to adjust the duration of the timer (from 1 to
24 hours). The timer indicator will illuminate. The unit will stop after selected number of hours.
SLEEP MODE
While in cooling pressing the "SLEEP" button will put the unit in sleep mode.
The fan speed will change to low.
It will automatically increase the desired temperature by 1℃ after an hour and by a further 1℃ after a
further hour. This means the unit will spend less time with the compressor running, and so run
quieter. The sleep function cannot be used in dry and fan modes.
If the water tank is filled, the unit is put into standby or the mode is changed, sleep mode will be
cancelled.
SWING
The inner louver will swing continuously left and right; by pressing the button again the movement will
stop and the louver remain in that position.
8