Subscribe to Our Youtube Channel
Related Manuals for Amcor SF12000E-V2
Summary of Contents for Amcor SF12000E-V2
- Page 1 SF12000E-V2 / SF12000EE-V2 USER MANUAL Thank you for choosing Amcor Please read this user manual before using this innovative Air Conditioner and keep it safe for future reference.
-
Page 2: Table Of Contents
CONTENTS SAFETY WARNINGS PARTS INSTALLATION OPERATION REMOTE CONTROL WATER-DRAINAGE MAINTENANCE TROUBLESHOOTING APPENDIX TECHNICAL DATA... - Page 3 Thank you for choosing this innovative Amcor air conditioner. We suggest that you keep this manual in a safe place for future reference. It describes the many benefits and advanced features this unique product has to offer. Before you use your new air conditioner you should carefully read these instructions to maximise this product’s performance.
-
Page 4: Safety Warnings
SAFETY WARNINGS Important! • Carefully read the instructions before operating the unit • This appliance is for indoor use only. • Rating: This unit must be only connected to a 220-240 V / 50 Hz earthed outlet. • Installation must be in accordance with regulations of the country where the unit is used. - Page 5 • Always place the unit on a dry and stable surface. • The appliance should not be installed in laundry or wet rooms. • The appliance must be placed in a room without sources of ignition (for example: open flames, an operating gas appliance or an operating electric heater). •...
-
Page 6: Parts
PARTS 1. Control Panel 2. Air Outlet 3. Buttons Handle 5. Castors 6. Upper Filter Frame 7. Exhaust Outlet 8. Lower Filter Frame 9. Rubber Stopper 10. Drain Screw Cap 11. Power Cord Check that all accessories are in the box and please read the instruction manual before assembling the unit. -
Page 7: Installation
INSTALLATION Warning：Before using this unit, please keep it upright for at least 3-4 hours. This unit can easily be moved from one room to another. While moving the unit please note that it must be kept upright and then placed on an even surface. -
Page 8: Operation
OPERATION POWER Press “POWER” to switch the unit On or Off. After the machine is turned on, it will automatically enter cooling mode with a desired temperature of 22℃ and low fan speed. COOL MODE Cold air is expelled from the front of the unit, and hot air is expelled through the exhaust hose. Press “MODE”... -
Page 9: Remote Control
REMOTE CONTROL POWER : Press to turn the unit on/off. TIMER :Press to set the timer. Once set, selected duration will flash 5 times as confirmation. Under power-on or standby mode, press this button to setup the on/off timer between 1~24. DOWN : Press to decrease the desired temperature, or the timer duration after... -
Page 10: Water-Drainage
WATER-DRAINAGE MANUAL DRAINAGE When the internal water tank is full the unit will stop working and the FULL indicator will illuminate. Shut off the unit and unplug. Avoid moving the model abruptly as this may cause water to spill from the internal tank. Place a tray under the water plug. -
Page 11: Troubleshooting
TROUBLESHOOTING Do not repair or disassemble the unit by yourself, unauthorized repair attempts will invalidate the warranty and may cause bodily harm. Problem Reason Solution No power supply. Plug in and turn on the unit. Water-full indicator illuminated. Drain the internal water tank. The unit does not Timer function is active. -
Page 12: Appendix
Please remember that this equipment will be further handled during the recycling process, so please be considerate when depositing your equipment. Please contact the local council for details of your local household waste recycling centres. TECHNICAL DATA Model SF12000E-V2 / SF12000EE-V2 2.93/10000 Cooling Capacity KW/BTU Cooling Rated Input 1150... - Page 13 AMCOR UK SUPPORT Please, for your own convenience, make these simple checks before calling the service line Has the unit been standing upright? (for at least 2 hrs) Is the unit plugged into the mains? Is the fuse OK? Switch the unit on and wait three minutes to see if the issue is resolved.
Need help?
Do you have a question about the SF12000E-V2 and is the answer not in the manual?
Questions and answers