About The Batt-Stick - TomTom Bandit Reference Manual

About the Batt-Stick

The Batt-Stick provides power for your TomTom Bandit and storage space for all your videos and
photos. When the Batt-Stick is inserted into the TomTom Bandit and locked, it forms a waterproof
seal.
The Batt-Stick contains TomTom Bandit battery and holds the microSD card. The USB connector is
used to charge the Batt-Stick and to transfer files to a computer. There is also an external
connector for an optional power cable.
Important: If you remove the Batt-Stick or lens cover be extra careful not to let dirt or water enter
the TomTom Bandit or the Batt-Stick. Only remove the Batt-Stick or lens cover in clean and dry
conditions.
Tip: Additional Batt-Sticks are available as accessories. Carry additional Batt-Sticks with you so
you always have enough power for your TomTom Bandit. Always keep the waterproof cover on a
Batt-Stick when the Batt-Stick isn't being used.
1. Batt-Stick lock.
2. TomTom Bandit connector.
3. microSD card slot.
4. USB 3.0 connector for charging and data transfer.
5. Connector with rubber cap for optional power cable and external audio cable.
6. TomTom Bandit ON, START and manual highlighting button.
7. Batt-Stick seal.
8. Battery power indicator.
57