Installing The 360 Pitch Mount - TomTom Bandit Reference Manual

3. Make sure the mount is aligned in the correct direction, then, in dry, room-temperature
conditions, attach the mount. Push the mount firmly down onto the surface.
The mount won't attach securely if you install it in damp and cold conditions.
4. Wait 24 hours for the adhesive to cure.
5. Install the TomTom Bandit on the mount. Make sure the TomTom Bandit is secure.
Important: Make sure your TomTom Bandit is secure before you start every activity. Regularly
check whether the mount is secure. If the activity involves shocks or vibration, use a lanyard
to prevent loss of the TomTom Bandit if the mount fails.

Installing the 360 pitch mount

The 360 pitch mount kit lets you mount your TomTom Bandit on a helmet or other flat or slightly
curved surface. Flat and curved mount bases are supplied. Once installed, you can easily adjust the
direction and angle of your TomTom Bandit.
Tip: Additional mounts are available as accessories.
Tip: To install your TomTom Bandit on handlebars, use the optional
Tip: You can also install your TomTom Bandit upside down. Set the ROTATION
180 to turn the image 180 degrees.
1. Before you install a mount, find the best position for your TomTom Bandit.
Only attach the mount to a smooth, hard surface. The mount won't securely attach to porous,
textured or soft surfaces.
To install the TomTom Bandit at different angles and on the left or right side of a helmet, you
can turn the TomTom Bandit's base more than 180 degrees around the TomTom Bandit body.
Tip: Use the Mobile app
2. Clean the area where you want to install the mount.
live viewfinder to set the TomTom Bandit to the correct view.
36
bike mount.
image setting to