Inserting A Memory Card; Video And Photo Modes And Settings - TomTom Bandit Reference Manual

Inserting a memory card

The photos you take and the videos you record are stored on a microSD card that is located in the
Batt-Stick. Use a microSD card that is a Class 10 standard or higher. Go to
a list of approved compatible microSD cards.
Note: If you insert a microSD card that is too slow to work with your TomTom Bandit, the
TomTom Bandit shows you a message and you are asked to use a compatible microSD card.
Tip: MicroSD cards can degrade over time, and performance may decrease as the microSD card
fills up. To maintain performance, you should regularly
Important: If you remove the Batt-Stick or lens cover be extra careful not to let dirt or water enter
the TomTom Bandit or the Batt-Stick. Only remove the Batt-Stick or lens cover in clean and dry
conditions.
1. Remove the Batt-Stick
2. Insert the microSD card into the memory card slot in the Batt-Stick.
Important: The microSD card must be inserted with the contacts facing up.
3. Install the Batt-Stick

Video and Photo modes and settings

Each video and photo mode has its own settings.
TomTom Bandit modes
Select a mode directly on the TomTom Bandit or from the
mode you can change the
Video
from the TomTom Bandit.
into the TomTom Bandit.
video or photo settings for the mode.
Normal high-quality video
format your microSD
Mobile App. When you have selected a
mode.
27
tomtom.com/support
card.
for