Table of Contents
Advertisement
Tip: You can also install your TomTom Bandit upside down. Set the ROTATION
180 to turn the image 180 degrees.
1. Before you install a mount, find the best position for your TomTom Bandit.
Only attach the mount to a smooth, hard surface. The mount won't securely attach to porous,
textured or soft surfaces.
To install the TomTom Bandit at different angles and on the left or right side of a helmet, you
can turn the TomTom Bandit's base more than 180 degrees around the TomTom Bandit body.
Tip: Use the
Mobile app
2. Clean the area where you want to install the mount.
Wax, oil, dirt and moisture reduce adhesion, which can result in a weak bond. Make sure that
the area is completely dry.
3. In dry, room-temperature conditions, attach the mount base. Push the mount base firmly down
onto the surface.
The mount base won't attach securely if you install it in damp and cold conditions.
4. Wait 24 hours for the adhesive to cure.
live viewfinder to set the TomTom Bandit to the correct view.
18
image setting
to
Advertisement
Table of Contents
