Front Cover Assy And Keypad - Sony Ericsson K200 Working Instruction, Mechanical

Reassembly Instruction continued

4.1.2 Front cover assy and keypad

M F
AKE SURE THAT THE
U
SE AIR BLOW EQUIPMENT IF NESSESSARY
M
AKE SURE THE RECEIVER
BEFORE YOU ASSEMBLE THE
MAKE SURE THAT THE KEYPAD IS CORRECTLY POSITIONED IN
F A .
THE RONT SSY
Place the Rear cover Assy over the Front Assy.
Press on all sides where front snap fit hooks are located
(1A-1D). Click sounds will be heard when the snap hooks
grips into the frame.
Tighten the four screws, according to the arrow indication.
Use the Torque screwdriver, set to 15 Ncm ± 6%.
3/000 21-1/FEA 209 544/127 A
©
Sony Ericsson Mobile Communications AB
A
RONT SSY GLASS IS CLEAN
.
(1), (2)
AND KEYPAD
R .
EAR COVER
.
ARE IN PLACE
Working Instruction, Mechanical
27(30)