Huawei B593 Quick Start Manual page 2

○
Power port
9
Connect to the B593 modem's power adapter.
○
USB port
10
Connect to a USB storage device.
Note:
This port cannot be connected to USB host devices such as computers.
○
TEL port
11
Connect to telephones or a fax machine (optional).
Note:
Only USB storage devices in FAT and FAT32 formats are supported.

Do not connect a telephone and fax machine to the B593 modem simultaneously.

○
LAN port
12
Connect to computers, switches, or other network devices.
○
LAN indicator
13
On: The port is connected to a device.

Blinking: Data is being transmitted through the port.

Off: No device is connected to the port.

○
WPS button
14
After the WPS function is enabled, press and hold this button for more than 0.5 seconds to
initiate WPS interconnection.
○
Reset button
15
Press and hold for more than 2 seconds to restore the B593 modem to its factory settings.
Note:
Restoring the default settings of the B593 modem will override all the previous
settings.
○
WLAN button
16
Press and hold for more than 2 seconds to enable or disable the WLAN function.
○
External antenna port
17
Connect to an external antenna.
Note:
Do not power off the B593 modem during the upgrade. Otherwise, the B593 modem
may be damaged.
Getting Started
Installing the USIM Card
Install the USIM card according to the illustration.
Note:
When removing the USIM card, gently press the USIM card in, then release. The

card will automatically pop out.
Do not remove the USIM card when it is in use. Doing so will affect the

performance of your B593 modem and data stored on the USIM card may be lost.
Connecting to a Power Adapter
Install the power adapter according to the illustration.
Note:
Only use power adapters compatible with the B593 modem and provided by a

designated manufacturer. Use of an incompatible power adapter or one from an
unknown manufacturer may cause the B593 modem to malfunction, fail, or could
even cause a fire. Such use voids all warranties, whether expressed or implied, on
the product.
Logging In to the Web Management Page
The Web-Based Utility of the B593 modem is a web browser-based interface that allows
easy view connectivity status and management through Internet browser.
For example, to access the Web-Based Utility of the B593 modem from a PC that runs on
Windows XP and uses IE 7.0, do as follows:
1. Connect the hardware of the B593 modem correctly.
2. Set the IP address of the connected computer and ensure that the IP address of the
computer is in the same segment as that of the B593 modem.
Note:
By default, the IP address of the B593 modem is 192.168.254.254, the subnet mask is
255.255.255.0. If the B593 modem is working as a router, it is recommended that the IP
address and DNS settings be obtained automatically.
3. Run Internet Explorer, enter http://192.168.254.254 in the address bar and press
Enter.
LTE is a trademark of ETSI. Version: V100R001_01 Part Number: 31010RSS