Table of Contents
Advertisement
Introduction
See the Important Safety and Product Information guide
in the product box for product warnings and other
important information.
Device Overview
1
Press to open the menu and
scroll through menu options.
Press to turn on the device.
2
Press to open the menu and
scroll through menu options.
Hold to turn off the device.
3
View tournament mode status.
Tournament
mode LED
Press to range with the laser.
While playing golf, the flag finder
4
feature starts automatically.
Press to select menu options.
5
Rotate the eyepiece to focus the
Adjustable
screen.
diopter
6
View device and battery status.
Status LED
7
Pull up to access the micro-USB
Weather cap
power and data port.
Micro-USB
Connect a compatible USB cable
power and data
to charge the device or transfer
port (under
data using your computer.
weather cap)
View manufacturer's
8
identification and certification.
Device label
Introduction
WARNING
Status LEDs
LED Activity
Solid blue (for 5 seconds after
turning on)
Alternating red and blue (for 5
seconds after turning on)
Off
Slow flashing blue
Solid red (after holding the
power button)
Rapid flashing red (connected
to a power source)
Solid blue and flashing
red (connected to a power
source)
Solid red (connected to a
power source)
Slow flashing red
Charging the Device
This product contains a lithium-ion battery. To prevent
the possibility of personal injury or product damage
caused by battery exposure to extreme heat, store the
device out of direct sunlight.
To prevent corrosion, thoroughly dry the USB port,
the weather cap, and the surrounding area before
charging or connecting to a computer.
The device is powered by a built-in lithium-ion battery
that you can charge using a standard wall outlet or a
USB port on your computer.
NOTE: The device will not charge when outside the
approved temperature range
1 Pull up the weather cap from the USB port.
2 Plug the small end of the USB cable into the USB
port on the device.
3 Plug the large end of the USB cable into an
external power source, such as an AC adapter or a
USB port on your computer.
4 Charge the device completely.
TIP: You can turn off the device to charge it faster.
Turning On the Device
The first time you turn on the device, you are prompted
to choose a language, select a unit of measure, and
set your driver distance.
1 Press
.
Status
The device is turned
on.
The battery is low.
The device is in active
mode.
The device is in
standby mode.
The device is turned
off.
The device is
charging in energy-
saving mode.
The device is
charging.
Charging is complete.
A software update is
in progress.
WARNING
NOTICE
(Specifications,
page 5).
1
Advertisement
Table of Contents
