Advertisement
REMOVE COVER FROM MOVEMENT
1. Open: Pull up on the square cover to access the battery
compartment.
2. Close: Replace the cover over the movement and press down.
Time Set
Wheel
Battery
AA
Compartment
POWER UP
1. Insert 1 fresh AA alkaline battery, according to polarity, into the
snug Battery Compartment.
2. Rotate the Time Set Wheel to set the time.
3. Mount on a wall and enjoy!
Note: The quartz movement will keep the clock running accurately.
If the clock does not operate, or steadily loses time, replace the
battery.
Learn more from our video:
Lift off to
access
Battery
Compartment
bit.ly/wallclock_setup
MOUNTING
1. Be sure the Cover is in the closed position.
2. Use the top Hanger Hole to mount the clock.
SPECIFICATIONS
Battery Requirements: 1 AA (IEC, LR6, 1.5V) required in the
Battery Compartment (Alkaline recommended)
Battery Life: 12 months
CARE & MAINTENANCE
• Always purchase the correct size and grade of battery most suitable
for intended use.
• Clean the battery contacts and also those of your clock prior to battery
installation.
• Ensure the battery is installed with correct polarity (+ and -).
• Remove battery from equipment when it is not used for an extended
period of time.
• Promptly remove an expired battery.
• The specifications for this wall clock may change without prior notice.
• Improper use or unauthorized opening of movement or clock housing
will void any warranty.
Advertisement
