Instruction Manual
4
Operation
The transmitter is operated by potentiometers and jumpers with which the start of
scale and full scale are set. The operator controls are accessible after unscrewing
the protective cover.
Adjustment element
for the zero point
Operator controls of the SITRANS P transmitter, series MK II
Figure 9
Setting the start of scale and full scale
Connect a DC amateur into the output circuit or to the test sockets.
Connection to the test sockets:
D externally clean the unit before opening the housing cover.
D Unscrew the housing cover.
D If applicable, pull out the analog indicator.
!
WARNING
Pay attention to the EC type test certificate when using the
transmitter in explosion hazard zone 1 or zone 0.
SITRANS P, MK II
C73000-B5674-C100-02
7MF4010
Adjustment element
for the span
Jumper for the
additional attenuation
67