Implanting the sensor
Figure A1
The sensor surface must have contact
ith the soil. For this purpose, the sen-
sor is inserted in the loose ground like a
plant and the soil is pressed around it.
Do not step or hammer on the sensor.
Figure A2
Implant the sensor directly in the irriga-
tion area and ensure that the sensor is
not located in a sink or elevation.
Care and maintenance
Maintenance
Figure 2, 4, B
Recommendation: Replace the batter-
ies of the control unit and the sensor as
ell as the sensor pad annually.
Storage
Completely drain all ater from the irri-
gation device.
Remove the batteries from the sensor
and the control unit.
Store the irrigation device at a dry and
frost-proof location.
Technical specifications
Operating pressure
Max. feed temperature 35
Ambient temperature
Fre uency
Radio range (max.)
Battery type
Subject to technical modifications!
16
0,1 - 1,0 (1
MPa
- 10)
(bar)
°C
+5 -> +60 °C
868,1
MHz
100
m
9V (6LR61 /
Alkaline)
EN
– 6