General Information On The Operation - Kärcher SensoTimer ST6 eco!ogic Manual

escription of the display
Illustrations on age 2
1 Radio signal and field strength
2 Battery status sensor
3 Tripping limit soil moisture
4 Measured soil moisture
5 Sensor 1 / ater outlet 1
6 Irrigation / manual irrigation
7 Sensor 2 / ater outlet 2*
8 Battery status control unit
9 Time / time of irrigation
10 Irrigation duration
11 Irrigation delay (eco!ogic function)
12 Break button and setting of the time
13 menu / esc button
14 OK button
15 Arro keys
* depending on model
escription of the Appliance
When unpacking the product, make sure
that no accessories are missing and that
none of the package contents have been
damaged. If you detect any transport dam-
ages please contact your dealer.
Illustrations on age 3
A G 3/4 reducer
B G1 ater connection ith pre-filter
C Top part of the casing for t o-channel
appliance*
D G 3/4 hose connection
E Tap connection adapter
F Control unit
G Battery compartment
H Display
I Keypad
J Sensor 1
K Sensor 2*
L Sensor cap
M Cover sensor pad
N Sensor pad
O Eyelet for theft protection*
P Notches for all mounting
Q Top part of the casing for single-chan-
nel appliance* (rear vie )
* depending on model
General information on the
operation
Basic functions of the enter keys
Flashing values are changed by means
of the arro keys.
OK button completes an entry and
s itches to the next entry field. It also
completes the entry in the last entry
field and then s itches into the auto-
matic mode.
esc button discards an entry and
s itches to the previous entry field or
exits the entry at the first field and
s itches into the automatic mode.
If no button is pressed for 30 seconds,
the appliance returns to the automatic
mode.
During the initial startup, it can individually
be selected for each ater outlet ho it is to
be operated:
In order to get to the automatic mode, at
least 1 sensor must be used or the de-
vice must be taught for time control.
Other ise the ater outlets for auto-
matic atering are inactive.
Sensor-controlled
The sensor is taught during the 60-sec-
ond countdo n, i.e. the radio signal is
detected automatically.
Time-controlled
The teaching process of the sensor is
cancelled ith the esc/menu button
during the 60-second countdo n.
In this case, the moisture tripping limit
at the control unit can not be set.
Locked / inactive
The 60-second countdo n passes
completely ithout the recognition of
the sensor or the esc/menu button be-
ing pushed, then the ater outlet is in-
active. After deactivation of ater outlet
1, the countdo n for outlet 2 can be en-
abled ith the OK button.
EN – 3 13