Kärcher SensoTimer ST6 Duo eco!ogic Original Instructions Manual
Hide thumbs
Also See for SensoTimer ST6 Duo eco!ogic:
- Operating instructions manual (373 pages) ,
- Manual (96 pages) ,
- Manual (373 pages)
Related Manuals for Kärcher SensoTimer ST6 Duo eco!ogic
Summary of Contents for Kärcher SensoTimer ST6 Duo eco!ogic
- Page 1 SensoTimer ST6 eco!ogic SensoTimer ST6 Duo eco!ogic Deutsch English Français Italiano Nederlands Español Português Dansk Norsk Svenska Suomi Ελληνικά Magyar 59665320 08/18...
- Page 2 sensor menu...
-
Page 4: Table Of Contents
Contents Environmental protection The packaging material can be recy- Contents ....EN cled. Please do not place the packag- General notes ... . . EN ing into the ordinary refuse for disposal, but Safety instructions. -
Page 5: Safety Instructions
Caution Safety instructions Only use 9V batteries (type 6LR61 / Al- This appliance is not intended for use kaline). by persons with limited physical, senso- Do not use rechargeable batteries. ry or mental capacities or lacking expe- ... -
Page 6: General Information On The Operation
General information on the Description of the display operation Illustrations on Page 2 Radio signal and field strength Basic functions of the enter keys Battery status sensor Tripping limit soil moisture Flashing values are changed by means Measured soil moisture of the arrow keys. - Page 7 Figure 5 Preparation control unit Contact radio signal. Note: The predefined order during com- As soon as the contact of the radio sig- missioning must be strictly observed. Oth- nal is established, the symbol for the ra- erwise it is not guaranteed that the sensor dio signal appears permanently.
-
Page 8: Further Functions
Manual irrigation of the water Preparation / teaching sensor 2* outlets * depending on model Figure 11 Valves can be opened manually: The setting process of sensor 2 starts The menu button activates the settings automatically after the watering setting mode. -
Page 9: Implanting The Sensor
Implanting the sensor Figure A1 The sensor surface must have contact with the soil. For this purpose, the sen- sor is inserted in the loose ground like a plant and the soil is pressed around it. Do not step or hammer on the sensor. ... -
Page 10: Troubleshooting
Troubleshooting Fault Cause Remedy The irrigation does not Water tap is closed. Open tap. take place in spite of the Pre-filter clogged. Clean pre-filter. programming. Valve does not open / When the control unit is re- Install the control unit on the top close.