Advertisement
You will need 2 person(s) for this assembly. You will need a Phillips head screw driver.
STEP 3 : Connect/Tighten(figure 1) Bottom
Assembly to Back(H).
G
STEP 5: Connect/Tighten(figure 1) Top
Supports(E) with cam locks facing down to
Left Side(I).
E E
I
IMPORTANT NOTICE:
● Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
● Check to be sure that you have all parts and hardware.
● Remove all wrapping materials, including staples & packing straps before you start to assemble.
● Do not tighten all screws/bolts until completely assembled.
● Keep all hardware parts out of reach of children.
Stand Up Bookcase LBC4123 • INSTRUCTIONS
H
Any problems or questions call Regency Office Furniture at 1-866-816-9822
STEP 4: Connect/Tighten(figure 1) Bottom and Back assembly to
the Left Side(I).
G
STEP 6: Connect/Tighten(figure 1) Right Side(I) to the
Top Supports(E), Back(H), and Bottom(G). Place all Cam Caps(B)
and position your 8 Shelf Pins(D). You are now ready to insert
shelves and connect the single/multiple unit top.
(To connect top see top instructions also enclosed.)
H
I
I
Advertisement
