Advertisement
Nail Bag
50mm Screws x20
40mm Screws x37
30mm Screws x80
Pre Assembly
Before beginning assembly remove the
transportation blocks from the bottom
of each panel.
Step 1
Place the door panel (No. 1) onto a rm and
level surface and place the door (No. 5) into
the opening making sure there is an equal
space of 12mm around the door.
*Use 2x fascia's from the xing kit as a guide
to achieve the correct spacing.
Once in position x the door to the door panel
with the 3x hinges (No. 19) securing each
hinge using 7x30mm black screws.
21x30mm black screws.
30mm
Pre drill
screw
hole
1
12mm
19
5
12mm
30mm Black Screws x23
20mm Black Screws x5
Felt Tacks x80
1
5
Please retain product label and instructions for future reference
Step 2
2
Position a window (No. 6) into each
window panel (No. 2) and secure the
window into place using 4x window
blocks (No. 21) and 3x30mm screws
per block.
Ensure to x the window blocks at
each corner of the window and then
to the upright framing on the window
panel.
24x30mm Screws
30mm
Pre drill
screw
hole
Step 3
Place the oor (No. 8) onto a rm
and level base, making sure that
there is suitable drainage and is
free from areas where standing
water can collect.
6
21
8
P 3
Advertisement
