Advertisement
Step 11
Cut the felt (No. 23) into 2x strips and lay
onto the roof, making sure to lay the felt
from the rear of the building to the front
as shown in the illustration.
*Ensure there is approximatley 50mm
of overhanging felt around the building.
Once in position secure the felt to the roof
using 78x felt tacks.
78x Felt Tacks
Felt
tacks
**Trim o excess felt following the shape
of the roof.
1
2
3
4
1
2
HANDLE
WITH CARE
Please retain product label and instructions for future reference
Please retain product label and instructions for future reference
Step 12
Arrange the cover strips (No. 16) at front
and side(s) of the building and x into
place using 3x30mm screws per strip.
*At the front of the building measure
the space between the roof & bottom
board and cut 2 cover trims to match.
12x30mm Screws
16
30mm
Pre drill
screw
hole
Step 13
Secure the fascia's (No's. 13, 14 & 15)
around the top of the building using
40mm screws as shown in the
illustration.
*Make sure to trap the felt between
the building and the facia.
19x40mm Screws
40mm
Pre drill
screw
hole
16
13
13
15
14
16
16
14
P 6
Advertisement
