Advertisement
Step 7
Fix the 2x "L" brackets to either end of
the ridge bar using 2x20mm screws
per bracket.
*Ensure the bracket plate(s) are
ush with each end of the ridge
bar.
Once in place position the ridge bar
between the gable and window
panel, securing into position using
2x30mm screws per side.
4x20mm Screws
4x30mm Screws
20mm
30mm
Pre drill
screw
screw
hole
Step 8
Arrange the eaves frames (No's. 10,
11 & 12) around the edge of the
roof sheet (No. 7) as shown in the
illustration.
Secure the framing in position using
30mm screws, ensuring to screw
through the roof sheet into the
frames.
16x30mm Screws
30mm
Pre drill
screw
hole
17
20
11
11
7
12
10
Step 9
Place the assembled roof panel on top
of the building and x into position
using 30mm screws.
*Ensure to screw through the roof
sheet into the panel's framing and
ridge bar.
22x30mm Screws
30mm
Pre drill
screw
hole
Step 10
b
Once the roof has been xed into
place, secure the building to the
oor using 40mm screws.
*Ensure to screw through the oor into
10
the oor bearers using the nail pattern
as a guide.
16x40mm Screws
40mm
Pre drill
screw
hole
Please retain product label and instructions for future reference
b
b
b
b
b
b
b
b
P 5
Advertisement
