Download Print this page

Configuring Tcp/Ip; Verifying Tcp/Ip Properties - ZyXEL Communications PRESTIGE 660R-6XC Quick Start Manual

Zyxel communications modem user manual

Advertisement

All computers must have a 10M or 100M network card and TCP/IP installed. TCP/IP should already be installed on computers
using Windows NT/2000/XP, Macintosh OS 7 and later operating systems. See your User's Guide for information on
configuring static IP address for your computer.
Installing TCP/IP Components
1. Click Start, Settings, Control Panel and double-click the Network icon.
2. The Network window Configuration tab displays a list of installed components.
To install TCP/IP:
a.
In the Network window, click Add.
b. Select Protocol and then click Add.
c.
Select Microsoft from the list of manufacturers.
d. Select TCP/IP from the list of network protocols and then click OK.

Configuring TCP/IP

1. In the Network window Configuration tab, select your network adapter's TCP/IP entry and click Properties.
2. Click the IP Address tab. Click Obtain an IP address automatically.
3. Click the DNS Configuration tab. Select Disable DNS.
4. Click the Gateway tab. Highlight any installed gateways and click Remove until there is none listed.
5. Click OK to save and close the TCP/IP Properties window.
6. Click OK to close the Network window.
7. Turn on your Prestige and restart your computer when prompted. Insert the Windows CD if prompted.

Verifying TCP/IP Properties

1. Click Start and then Run. In the Run window, type "winipcfg" and then click OK to open the IP Configuration window.
2. Select your network adapter. You should see your computer's IP address, subnet mask and default gateway.
Configuring TCP/IP
1. Click Start, Settings, Network and Dial-up Connections and right-click Local Area Connection or the connection you
want to configure and click Properties. For Windows XP, click start, Control Panel, Network and Internet
Connections and then Network Connections. Right-click the network connection you want to configure and then click
Properties.
2. Select Internet Protocol (TCP/IP) (under the General tab in Win XP) and click Properties.
P
r
e
p
a
P
r
e
p
a
These procedures are for dynamic IP address assignment.
Set ting up Yo ur W ind ow s 95 /98 /Me C omp ute r
Set ting up Yo ur W ind ow s NT /20 00 /XP Comp ute r
r
i
n
g
Y
o
u
r
N
e
t
w
o
r
i
n
g
Y
o
u
r
N
e
t
w
o
r
k
r
k

Advertisement

loading