Table of Contents
Advertisement
8.
ALARM MODE:
When a concentration of smoke is detected, the smoke alarm will go into
'Alarm Mode'. It will sound the alarm signal and the LED will flash.
The smoke alarm will also transmit the alarm signal to the other connected
alarms, which will also sound the alarm signal after a short delay.
Please note that only the originating alarm's LED will flash, so it can be
identified.
21
9.
PAUSE/HUSH FUNCTION:
If the smoke alarms are to set into a false alarm by cooking, fireplace, etc. they
can be paused for 10 minutes by pressing the test button on the originating
smoke alarm only (indicated by the flashing LED).
The reason of this is that it is necessary to locate the source of the alarm before using
the hush function. This is to make sure that it is not a life threatening situation.
22
Advertisement
Table of Contents
