Table of Contents
Advertisement
®
CyberResearch
Displays
Panel Mounting the Display
2.3.2
1. Panel cutout is 356mm H x 440mm W for landscape installation (Figure 6).
®
2. Install C
RAQ
Y
™
Poron
gasket on the rear of the unit is flush against panel (critical for NEMA
compliance).
: Steps 3 & 4 require a second person
: Steps 3 & 4 require a second person
N
N
OTE
OTE
3. Align studs on the C
3. Align studs on the C
panel as seen in Figure 6.
panel as seen in Figure 6.
Important!
Do not exceed 30 in/lbs when tightening mounting nuts.
4. Also from rear of the panel, second person must install and tighten the fourteen
5. 10-32 mounting nuts.
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
in panel cutout. Ensure all studs clear cutout opening and
RAQ with the holes in mounting plate from the rear of
RAQ with the holes in mounting plate from the rear of
Y
Y
Figure 6: Panel-Mount Landscape Installation
®
C
RAQ
21
Y
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
17
Advertisement
Table of Contents
Need help?
Do you have a question about the CyRAQ 21C Series and is the answer not in the manual?