GEM 9468 Operating Instructions Manual page 9

7.3.1 Electrical connection
Electrical connection
type:
Cable diameter:
Recommended motor
protection:
Rated voltage:
Power consumption:
Current consumption:
Max. current at start up:
7.4 Mechanical data
Installation position:
Protection class:
Weight:
Manual override:
Operating time:
Torques:
Nominal travel:
Max. travel:
Setting range:
www.gemu-group.com
Binder connector series 692/693
6.0 to 8.0 mm
The motor protection must be provided on-site.
GEMÜ recommends the following motor protection:
Motor protection switch
type:
Set current:
24 V DC (+10/-15 %)
Actuator version 2070:
Actuator version 4100:
Actuator version 4200:
Actuator version 2070:
Actuator version 4100:
Actuator version 4200:
Actuator version 2070:
Actuator version 4100:
Actuator version 4200:
Optional
IP 65 acc. to EN 60529
Actuator version 2070: 4.6 kg
Actuator version 4100, 4200: 11.6 kg
via enclosed hand crank
Actuator version 2070: approx. 15 s
Actuator version 4100: approx. 20 s
Actuator version 4200: approx. 16 s
Actuator version 2070: 70 Nm
Actuator version 4100: 100 Nm
Actuator version 4200: 200 Nm
90°
93°
0 to 20° (limit switch Min.)
70 to 93° (limit switch Max.)
Siemens 3RV 1011-1FA10
4.0 A
63 W
105 W
90 W
2.6 A
4.4 A
3.6 A
14.0 A
35.0 A
35.0 A
9 / 26
7 Technical data
GEMÜ 9468