15 Operation
The GEMÜ 9468 motorized actuator is delivered in its open
position.
The following drawings differ depending on the actuator ver-
sion!
1. Disconnect the plant from power supply and secure
against recommissioning.
2. Remove the protective caps 1.
3. Undo screws 2.
4. Remove the cover of the actuator 3.
5. Undo the screws on the corresponding limit switch
(4 = "CLOSED", 5 = "OPEN").
6. Move limit switches to the desired position.
7. Tighten limit switch screws.
GEMÜ 9468
1
2
3
8. Put on cover of actuator 3.
9. Tighten cover 3.
10. Put on protective caps 1.
ð Limit switches are set.
20 / 26
www.gemu-group.com