Snooze; Dashes, Hh.h, Ll.l Or Stuck Indoor Temperature; Inaccurate Indoor Temperature Reading; Manually Set Time/Date: Program Menu - La Crosse Technology 308-2408FR Faqs

Snooze

•When the alarm sounds, press ZZ once to stop the alarm temporarily. The letters
"AL" will flash. The alarm will beep again in 5 minutes or after your previously set
snooze duration.
•To stop the daily alarm, press any button EXCEPT the ZZ when alarm is beeping.
The alarm will stop and "AL" icon becomes solid; alarm will beep again same time
next day.

Dashes, HH.H, LL.L or stuck Indoor Temperature

Explanation: These symbols are error messages indication the indoor sensor is
outside of its readable range. For indoor readings, this is generally a power related
issue.
 Check that the AC adapter cord is inserted into a working outlet.
Batteries may be overpowered or underpowered. Remove batteries from the

weather station.
 Press any button 20 times. Leave the weather station unpowered for 1-2 hours.
 If the indoor temperature is still shows dashes, HH.H or LL.L, the weather
station may need replacement.

Inaccurate Indoor Temperature Reading

Side-by-side test: Bring the outdoor sensor in the house and place it next to the
weather station for 2 hours.
 Compare indoor and outdoor temperature. The temperature should be within 4
degrees to be within tolerance.
 Look for heat sources such as sunlight, door or window frames or reflected heat
or cold near the weather station.
Check batteries and AC adapter

Manually Set Time/Date: Program Menu

 Hold the SET button for 5 seconds to enter setting mode.
 Use the ▼ or ▲ buttons to adjust a value.
 Press the SET button to confirm and advance.
Setting Order:
Time Zone
•
Daylight Saving Time Indicator
•
Hours
•
Minutes
•
Snooze duration
•
PROGRAM MENU
1. Hold the SET button for five seconds.
2. The Time Zone 04 (Pacific) will flash.
3. Press the ▼ or ▲ buttons to select your time zone.
04 = Pacific
La Crosse Technology, Ltd.
cord.
www.lacrossetechnology.com/support Page 8