See the section on
mounting the outdoor sensor.
Note: When your clock is powered on, it starts to receive WWVB signal for seven
minutes. The tower icon will flash.
Note: During reception of the WWVB time signal, the buttons will not function.
Outdoor Temperature Sensor
Compatible Outdoor sensors
The TW004 (433MHz) outdoor sensor comes packaged with this weather station.
This is the only compatible sensor.
Outdoor Temperature Signal Strength
Explanation: The weather station will search for the outdoor temperature outdoor
sensor for 3 minutes once batteries are installed or when the ▲ button is held for 3
seconds.
The temperature display will be dashes "---".
Dashes show for Outdoor Temperature
Explanation: Dashes mean the connection is lost between the weather station and
the outdoor sensor.
Batteries
often resolve the connection.
Distance/Resistance
and the weather station.
Turn the weather station 90 degrees towards the outdoor sensor to provide
better reception. This allows more antenna surface to face the outdoor sensor
signal.
Try the
factory restart.
Power Requirements
2-AAA
batteries
We recommend Alkaline batteries for the outdoor sensor.
You may choose to use Lithium batteries for temperatures below -20°F/-28.8°C.
Inaccurate Outdoor Temperature Reading
Explanation: High outdoor temperature readings are generally a location issue.
Low outdoor temperature readings are power related or a sensor going bad.
The outdoor sensor reads the environment where it is mounted. When mounted
inside the home, it will read inside temperature.
When the outdoor sensor reads high during the day, but not at night, it is a
positioning
problem.
Look for heat sources such as sunlight, door or window frames or reflected heat.
La Crosse Technology, Ltd.
mounting
and
distance/resistance/interference
can cause loss of connection between the outdoor sensor
power the outdoor sensor.
www.lacrossetechnology.com/support
for details on
Page 3