Weather Station; Power Requirements; 12-Hour Time Format; Fahrenheit Temperature Display - La Crosse Technology 308-2408FR Faqs

Interference:
 Consider items in the signal path between the outdoor sensor and the weather
station.
 Sometimes a simple relocation of the outdoor sensor or the weather station will
correct the interference.
 Windows can reflect the radio signal.
 Metal will absorb the RF (radio frequency) signal.
 Stucco has a metal mesh that absorbs signal.
 Avoid transmitting antennas: (ham radios, emergency dispatch centers, airports,
military bases, etc.)
 Electrical wires (utilities, cable, etc.)
 Vegetation is full of moisture and reduces signal.
 It is difficult for RF (radio frequency) signal to travel through a hill.

Weather Station

Power Requirements

 This weather station is powered by a 5-volt AC adapter.
 Optional CR2032 backup battery may be used.

12-Hour time format

 Time can display in 12-hour (am, pm) time only.

Fahrenheit temperature display.

This station reads in Fahrenheit only.


Backlight

 AC adapter: The backlight is on continuously when operating the weather station
with the 5-volt AC adapter.
 Press the button to dim the display or to brighten the display.

Set Time Alarm

1. Hold the AL button to enter alarm set mode.
2. The alarm hour will flash.
3. Press the ▼ or ▲ buttons to set the alarm hour.
4. Press the AL button to confirm adjustments and move to the minutes.
5. The alarm minutes will flash.
6. Press the ▼ or ▲ buttons to set the alarm minutes.
7. Press the AL button to confirm adjustments exit.
Note: The alarm will sound for two minutes, then shut off completely.

Activate | Deactivate Alarm

•Press the AL button once to activate the alarm.
•The letters "AL" will appear above the time when the alarm is active.
•Press the AL button once again to deactivate the alarm.
La Crosse Technology, Ltd. www.lacrossetechnology.com/support Page 7