Table of Contents
Advertisement
• See the section on
mounting the outdoor sensor.
Outdoor Temperature Sensor
Compatible Outdoor Sensors
• The TX141-Bv3outdoor sensor comes packaged with this temperature station.
• The TX141-B (all versions) (433MHz) are compatible with this temperature station.
Quick Connect
Explanation: Use the quick connect for a temperature station and outdoor sensor that
have been working but lost connection due to interference or low batteries. This is not a
thorough factory reset.
1.
Bring the outdoor sensor and temperature station together inside and place the units
5-10 feet apart with nothing between them.
2.
Hold the SENSOR button on the temperature station. The outdoor temperature area
will flash.
3.
Remove battery cover from the outdoor sensor and press and release the TX button
to send the signal.
4.
Wait for 2 minutes for the outdoor temperature to appear on the temperature station.
Factory Restart:
If the above procedure does not work, please try the factory reset.
•
Outdoor Temperature Signal Strength
If sensor loses connection to the weather station for any reason, the weather station will show
•
NO after 30 minutes.
The weather station will search for 3 minutes every hour to reconnect with sensor.
•
Hold the SENSOR button 3 seconds to search for the outdoor sensor.
•
Reception Icon will flash while searching for sensor. Outdoor sensor area will show dashes
•
during the search.
When sensor is received the icon will be solid.
•
If no sensor received, the icon will disappear after 3 minutes of searching if sensor is not found.
•
NO will again show in the outdoor sensor area.
Dashes show for Outdoor Temperature
Explanation: Dashes mean the connection is lost between the temperature station and
the outdoor sensor.
Batteries
often resolve the connection.
•
Distance/Resistance
•
the temperature station.
• Turn the temperature station 90 degrees towards the outdoor sensor to provide better
reception. This allows more antenna surface to face the outdoor sensor signal.
• Try the
quick connect
La Crosse Technology, Ltd. www.lacrossetechnology.com/support
mounting
and
distance/resistance/interference
can cause loss of connection between the outdoor sensor and
or
factory restart.
for details on
Page 3
Advertisement
Table of Contents
