Download Print this page
PEERLESS WSP 716 Assembly Instructions

PEERLESS WSP 716 Assembly Instructions

External wall plate

Advertisement

Quick Links

Assembly Instructions - External Wall Plate
IMPORTANT!
Read entire instruction sheet
before you start installation and assembly.
WARNING
• Wall or mounting structure must be capable of sup-
porting a minimum static load of 600 lb (272 kg).
PARTS LIST
PART #
QTY.
A 024-1043
024-1042
B 510-9108
C 520-9521
D 560-9708
E 540-1063
C
THIS
END UP
Visit the Peerless Web Site at www.peerlessmounts.com
DESCRIPTION
1
wall plate 16" centers
wall plate 24" centers
10
1/4-20 x 1/2" phillips screw
12
1/4-20 x 2 1/2" phillips screw
12
toggler
22
washer
E
B
Cable Management Ports
WSP 724
Note: Wall plate may
appear slightly different
than illustrated.
MAXIMUM LOAD CAPACITY:
200 lb (91 kg)
WSP 716, WSP 716S, and WSP 716W for studs on 16" (406
mm) centers, contains four cable management ports.
WSP 724, WSP 724S, and WSP 724W for studs on 16", 20"
and 24" (406 mm, 508 mm, 610 mm) centers, contains four
cable management ports.
A 024-4043
B 520-9511
C 520-9522
D 560-9708
E 540-2056
A 024-2043
D
B 520-9511
C 520-9522
D 560-9708
E 540-2056
A
WSP 716
1 of 4
For customer care call 1-800-729-0307 or 708-865-8870.
Models:
WSP 716, WSP 716-S,
WSP 716-W, WSP 724, WSP 724-S,
WSP 724-W
PARTS LIST
PART #
QTY.
DESCRIPTION
1
wall plate 16" centers
024-4042
wall plate 24" centers
10
1/4-20 x 1/2" phillips screw
12
1/4-20 x 2 1/2" phillips screw
12
toggler
22
washer
PARTS LIST
PART #
QTY.
DESCRIPTION
1
wall plate 16" centers
024-2042
wall plate 24" centers
10
1/4-20 x 1/2" phillips screw
12
1/4-20 x 2 1/2" phillips screw
12
toggler
22
washer
*Note: The mounting hole which
is closest to the lip of the plate
indicates the up position.
*
THIS
END UP
ISSUED: 11-14-06 SHEET #: 024-9010-1

Advertisement

loading

Summary of Contents for PEERLESS WSP 716

  • Page 1 WSP 724-W before you start installation and assembly. 200 lb (91 kg) WSP 716, WSP 716S, and WSP 716W for studs on 16" (406 mm) centers, contains four cable management ports. WARNING WSP 724, WSP 724S, and WSP 724W for studs on 16", 20"...
  • Page 2 Wall plate (A) can be mounted to three studs that are 16" apart on center for WSP 716 models and 16", 20" or 24" on center for WSP 724 models. Use a stud finder to locate the edges of the studs. Use of an edge-to-edge stud finder is highly recommended.
  • Page 3 Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870. © 2005 Peerless Industries, Inc. All rights reserved. Peerless is a registered trademark of Peerless Industries, Inc. All other brand and product names are trademarks or registered trademarks of their respective owners.
  • Page 4 1/2" screws (B) and washers (E) as indicated below. WSP 724 WSP 716 PLA 50 = PLA 60, PLAV 60, PLAV 70 = 4 of 4 ISSUED: 11-14-06 SHEET #: 024-9010-1 Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.

This manual is also suitable for:

Wsp 716-sWsp 716-wWsp 724Wsp 724-sWsp 724-w735029247210