Returning The Rt-123 To The Factory Default Condition(Initialization) - Zoom RhythmTrak RT-123 Operation Manual

Returning the RT-123 to the factory default condition (initialization)
You can reset the RT-123 to the factory default condition. Use this function with care, because it will
erase all patterns and songs that have been recorded by the user.
MEASURE
PATTERN(SONG REC)
INSERT/COPY DELETE/ERASE
NOTE
After initialization, all user patterns U01 - U99 will be blank.
1
Turn power to the RT-123 on while holding the [REC] key down.
STEP
The indication "Init" flashes on the display.
When wishing to go ahead with the initialization, press the [REC] key once more. To
2
STEP
cancel the procedure, press the [STOP/EXIT] key.
When initialization is carried out, all settings and data of the RT-123
are reset to the factory default condition, and then the unit starts
up. If the process was canceled, the unit starts up normally.
54
Epif Rock
BEAT
25-29
Funk Trap
20-24
Standard Kit
15-19
Studio Drums
10-14
Live Rock
00-24
STEP
Bass
00-09
Programs Basic Drum Kits
BASS MUTE BASS DRAM A
– +
Percussion/SFX
55-64
General Drums
50-54
Groove PLAY
Techno Beat
MODE
45-49
Rap/HipHop SONG
40-44
Modern Drums
35-39
TEMPO
Ballad Set
STEP REC
REAL-TIME REC
PLAY
DRAM B
II
PATTERN
STOP/EXIT
2
1, 2
STEP REC
POWER
ON OFF
300mA DC9V
STEP REC
STOP/EXIT