Using Midi Equipment To Play The - Zoom RhythmTrak RT-123 Operation Manual

Using MIDI equipment to play the RT-123
Using a MIDI sequencer, MIDI keyboard, or similar MIDI Device you can play the built-in sound
sources of the RT-123.
INSERT/COPY DELETE/ERASE
Connect the MIDI OUT jack of the MIDI sequencer or other MIDI component to the
1
STEP
[MIDI IN] connector of the RT-123, using a MIDI cable.
Use the [FUNCTION] key and pad 13 (MIDI) to assign the tracks of the RT-123 to
2
receive MIDI channels which are matched to the send channels of the external MIDI
STEP
component.
For information on the MIDI channel setting procedure, see page
49.
3
Play the MIDI sequencer or keyboard.
STEP
The RT-123 produces sound according to the note numbers
received via the [MIDI IN] connector. Program change messages
can be used to switch drum kits and bass programs of the RT-123.
For information on program change numbers and corresponding
drum kits and bass programs, please refer to the "Reference"
section at the end of this manual.
Programs Basic Drum Kits
– + BASS MUTE BASS DRAM A
OPEN HAT
7 CLICK VOL
REPEAT/STEP
TEMPO
Ballad Set
STEP REC
2
REAL-TIME REC
PLAY
DRAM B
II
STOP/EXIT
2
53