Indel Webasto Marine Isotherm Drawer DR 150L Instructions For Use Manual page 12

DRAWER 150L-12V
ENGLISH
ASSEMBLY
The refrigerators of the DRAWER range are pre-set for
being assembled in a niche.
Fastening can be done on the front plate band (see
Fig. 3).
Fig. 3
It is very important for the refrigerating unit, consisting of the compressor and the condenser, to be well
ventilated, with the cool air coming in from the bottom and going out from the top. You must ensure proper
ventilation of the refrigerating unit. The air inlets and outlets must have a free cross section of at least 200
cm (see ventilation diagrams in Fig. 4-5).
2
Fig. 4 Fig. 5
Notice
The fridge side bars are adjusted in the factory for optimal drawer closing. Please do not modify them.
Fig. 6
SIDE BARS
10
DRAWER 150L-12V_rev.04_03-2014