Table of Contents
Advertisement
5 5 5 5
In the Security Configuration window, click the Encryption
Mode drop-down arrow and select WPA2-Enterprise .
6 6 6 6
In the IEEE 802.1X Authentication area, note that the
check box marked Enable IEEE 802.1X authentication for
this network is selected. With IEEE 802.1X authentication,
each wireless device (client) sends a signal to the wireless
access point, which in turn sends the signal to the RADIUS
server. The server determines whether or not the client is
allowed to join the network.
7 7 7 7
Click the EAP ( E xtensible A uthentication P rotocol) Type
drop-down list and select an authentication protocol:
PEAP ( P rotected E xtensible A uthentication P rotocol –
the (default). With PEAP, you can select from three
authentication extensions:
MS-CHAPV2. Microsoft's version of CHAP
(Challenge-Handshake Authentication Protocol
(default)
GTC
TLS/SmartCard
TLS ( T ransport L ayer S ecurity). There are no
authentication extension options with TLS.
Chapter 2: Setting Security
21
Advertisement
Table of Contents
