Zoom 4412A/TF User Manual page 19

6 6 6 6
In the Preconfigured key [WEP] area , do the following:
a
In the Format for entering key drop-down list, select
ASCII characters if your network uses all Zoom
wireless products
Hexadecimal digits if an access point, router, or
some adapters are not Zoom products
b
In the Key Length drop-down list, select 128 bits or 64
bits .
Note: 128-bit WEP provides more security than 64-bit,
but 128-bit could diminish network performance.
c
In the Key Index drop-down list, if you are using a 64-bit
key, select which of four keys – 1, 2, 3, or 4 – will be
used to encrypt the data. The key you select must be the
same one that is selected on the access point. We
recommend that you use Key 1.
128-bit WEP uses just a single key.
d
In the Network Key text box, enter a key using the table
below as a guide.
The key must be the same for all the devices on your
network.
If you selected key
type...
Hexadecimal digits
– 128 bits
Hexadecimal digits
– 64 bits
ASCII – 128-bits
ASCII – 64 bits
7 7 7 7
Re-enter the key in the Confirm Network Key text box.
Chapter 2: Setting Security
Enter exactly...
26 characters A–F, a–f and 0–9. For
example,
00112233445566778899AABBCC.
10 characters. The characters can
be A-F, a-f, and 0-9. For example,
11AA22BB33.
13 characters. The characters can
be any upper- or lower-case letters
and numbers. For example:
MyKey12345678.
5 characters. The characters can be
any upper- or lower-case letters and
numbers. For example, MyKey.
19