WPA
Select WPA if you are linking to a corporate network that uses a
RADIUS ( R emote A uthentication D ial- I n U ser S ervice) server
that does not support WPA2.
5 5 5 5
In the Security Configuration window, click the Encryption
Mode drop-down arrow and select WPA .
6 6 6 6
In the IEEE 802.1X Authentication area, note that the
check box marked Enable IEEE 802.1X authentication for
this network is selected. With IEEE 802.1X authentication,
each wireless device (client) sends a signal to the wireless
access point, which in turn sends the signal to the RADIUS
server. The server determines whether or not the client is
allowed to join the network.
Chapter 2: Setting Security
23