Table of Contents
Advertisement
Welcome!
Thank you for choosing the ZNYX Networks NetBlaster embedded PCI Mezzanine Card
(PMC) Fast Ethernet Adapter. Your adapter is designed to provide a lifetime of superior service
in your system with PMC slots.
NetBlaster
Fast Ethernet Adapter Models
PMC
NetBlaster PMC ZX222 provides two 100BaseFX ports with SC 62.5/125 micron
multimode fiber connectors. It is a single-wide PMC module.
Documentation and Software
Documentation and software for the NetBlaster PMC adapter is distributed electronically. You
can retrieve documentation and drivers from the ZNYX Networks web site in the driver
download section. Please contact ZNYX Networks Customer Support if you have trouble
locating the appropriate driver or installation documentation.
Installation Procedure
There are two basic steps you need to follow before you can operate your NetBlaster adapter.
1. Install the NetBlaster adapter (hardware)
2. Install the driver.
The steps outlined here help you install and troubleshoot the hardware. Driver installation
instructions are available along with the driver itself from the ZNYX Networks web site. To get
the most recent operating system specific driver, go to the ZNYX Networks website or contact
Technical Support at:
Telephone:
(510) 249-0800 or (800) 724-0911
Fax:
(510) 656-2460
Email:
support@znyx.com
Website:
www.znyx.com/drivers
ZNYX Networks NetBlaster ZX222 PMC Fast Ethernet Adapter · User' s Guide
Page 3
Advertisement
Table of Contents
Troubleshooting
