Driftkontrolle "AR"
Kalibrieren mit Driftkontrolle
Bei Kalibrierung schaltet das Gerät die
Driftkontrolle automatisch ein bzw. aus.
Der Abbruch der Driftkontrolle und die
manuelle Übernahme ist durch Drücken
von RUN/ENTER möglich.
Messungen mit Driftkontrolle
pH/mV
ISE
bis/until
AR
RUN/ENTER
Drift control "AR"
pH
Gewünschte Meßart wählen.
Driftkontrolle einschalten.
Meßwert eingefroren.
pH
"
$
Anzeige AR blinkt.
Warten bis das Meßsignal
stabil und AR nicht mehr
blinkt.
Calibration with drift control
During calibration the meter automatically
switches the drift control on or off
respectively.
By pressing RUN/ENTER it is possible to
cancel the drift control and to accept the
value manually.
Measurements with drift control
°C
TP
Select desired kind of
measurement.
Switch on drift control.
Measured value frozen.
°C
TP
AR
AR display indicator flashes.
Wait until the measuring signal is
stable and AR stops flashing.
S+
,21
39