Table of Contents
Advertisement
After selecting the Finish button, the DSL Router Reboot screen appears.
The router reboots to save the changes made.
Local Area Network (LAN) Setup
You can configure the DSL Router IP address and Subnet Mask for the LAN
interface to correspond to your LAN's IP Subnet. If you want the DHCP
server to automatically assign IP addresses, then enable the DHCP server and
enter the range of IP addresses that the DHCP server can assign to your
computers. Disable the DHCP server if you prefer to manually assign IP
addresses. Click on Next to continue. The Save button only saves the LAN
configuration data, but does not apply the configurations. Select the
Save/Reboot button to save the LAN configuration data and reboot the router
and apply the new configurations.
34
6238 Wi-Fi Router with VOIP User's Guide
6238-A2-ZB20-10
Advertisement
Table of Contents
