Table of Contents
Advertisement
Configure System Log
If the log is enabled, the system will log selected events including Emergency, Alert,
Critical, Error, Warning, Notice, Informational, and Debugging. All events above or
equal to the selected log level will be logged and displayed.
If the selected mode is Remote or Both, events will be sent to the specified IP
address and UDP port of a remote system log server. If the selected mode is Local or
Both, events will be recorded in the local memory. Select the desired values and click
on the Save/Apply button to configure the system log options.
SNMP
SNMP (Simple Network Management Protocol) provides a means to monitor status
and performance as well as set configuration parameters. It enables a management
station to configure, monitor and receive trap messages from network devices.
6238-A2-ZB20-10
6238 Wi-Fi Router with VOIP User's Guide
73
Advertisement
Table of Contents
Need help?
Do you have a question about the 6238-I2 and is the answer not in the manual?
Questions and answers