Table of Contents
Advertisement
LAN Local Area Network (LAN) Setup
You can configure the DSL Router IP address and Subnet Mask for the LAN interface to
correspond to your LAN's IP Subnet. If you want the DHCP server to automatically assign IP
addresses, then enable the DHCP server and enter the range of IP addresses that the DHCP
server can assign to your computers. Disable the DHCP server if you would like to manually
assign IP addresses.
The Save button only saves the LAN configuration data, but does not apply the configurations.
Select the Save/Reboot button to save the LAN configuration data and reboot the router and
apply the new configurations.
6219-X1 Router Users Guide
48
Advertisement
Table of Contents
