Tone Selection - Zhone 6218-I2 User Manual

Advanced Setup

Tone Selection

66
6218-I2 Wireless Router User's Guide
No Retrain: In this mode the router will try to establish a connection as in
normal mode, but once the connection is up it will not retrain if the signal
is lost.
L3: Puts the router into the L3 power state.
Select a test mode and click on Apply. Then click on Tone Selection.
To view the ADSL Tone Settings screen, click on the Tone Selection button of
the DSL Advanced Settings screen (see
The frequency band of ADSL is split up into 256 separate tones, each spaced
4.3125 kHz apart. With each tone carrying separate data, the technique
operates as if 256 separate modems were running in parallel. The tone range is
from 0 to 31 for upstream and from 32 to 255 for downstream.
Do not change these settings unless so directed by your ISP.
Figure 67: Tone Settings
Figure 66).
6218-A2-ZB23-10