Quick Setup With Auto-Connect Disabled - Zhone 6218-I2 User Manual

Quick Setup with Auto-Connect Disabled

6218-A2-ZB23-10
1 Select Quick Setup. The Quick Setup initial screen appears.
2 Verify that DSL Auto-Connect is not selected. Entry boxes for VPI and
VCI appear when DSL Auto-Connect is not selected.
3 Specify VPI and VCI as directed by your ISP.
Figure 25: Specifying VPI and VCI
4 Click on Next. The Connection Type screen appears.
Figure 26: Connection Type
5 Select the protocol and encapsulation type required by your ISP.
Quick Setup with Auto-Connect Disabled
6218-I2 Wireless Router User's Guide
39